beatle & Welding Barges:            

      EQUIPMENT LOGISTICS SUPPORT BARGES - NOT ALL SHOWN

• Single screw 1 X 30 - 90 HP (four stroke outboard)
• Rear console operating location
• All round double bit bollards
• 360 degrees fendering
• All Beatles fitted safety gear requirements.

DIMENSIONS

• 6.0 to 12.0 meters length
• 2.5 to 3.5 meters beam.
• Net tonnage - 1.8 - 5.4 Ton

ALI MULTICAT - MV Geelong;

     CURRENT 2C & 2D SURVEY

• Twin screw 2 X 318 HP Scania's.
• Bow push points, tow bollard (4.6T BP).
• 240 volt hydraulic pump running deck gear.
• 7 -ton deck winch.
• 45 kva generator powering facilities / aircon.
• 240 volt air compressor for breathing / air tools.
• Pollution recovery capabilities / spill response equipment.
• Oxy / acetylene cutting equipment mounted.
• Hiab sea crane 80 fitted 3.8 ton @ 1.9m
• Hiab sea crane 80 fitted 0.4 ton @ 9.8m
• 6 man smoko room, 2 x toilets, shower, etc
• Fitted with its own standby tender

•·         First aid station & equipment.

•·         Extensive fire fighting capabilities / equipment.

•·         4000 psi high pressure water cleaner.

DIMENSIONS

• 18 meters length X 6.6 meters beam.
• Net tonnage - 60 Ton

crew boat - MV Gunsafe:

     CREW TRANSFER, LOGISTICS, & WORK BOAT CURRENT 2C SURVEY

• 2C survey 10 + 2
• Twin screw 2 X 260 HP Volvo's.
• Enclosed wheel house with smoko facilities
• Bow mounted anchor winch.
• 24 volt system powering facilities.
• Toilet fitted
• Radar fitted

DIMENSIONS

• 9.8 meters length
• 2.6 meters beam.
• Net tonnage - 6.0 Ton

WORKBOAT/ BARGE / LIFT PONTOON - MV Barry:

      CURRENT WA 2E SURVEY

• Currently Twin screw 2 X 115 HP Engines (2 X 225 Honda 4 Stroke Engines already purchased and going on in the next couple of months).
• Bow push-pads, Tow Bollard.
• Perkins auxiliary hydraulic power pack
• Raised air-conditioned wheel house (final wiring up required)
• Deck Crane fitted 3.0 Ton @ 1.7 m.
• Deck Crane fitted 0.2 Ton @ 9.8 m.
• 8 -Ton Thomas deck winch with horizontal and vertical bow rollers
• Total Deck loading 10.0 ton
• Welder / Generator 300 + amp and 15 kva (still to be fitted to supply power to wheel house).

DIMENSIONS

• 11.95 meters length
• 5.95 meters beam.
• 1.9 meters molded depth
• Net tonnage - 27 T